Fit2Sail

View Original

The Glories of One Inch!

We’re in the process of moving our double bunk from the forepeak, where it’s been since we “finalized” the interior in 1993. The initial thought around not putting it in the main salon was that I wanted to have a bunk I didn’t have to make up every night.

 

Hah.

That space, as you can see in the video, is also where the head is. Where the main tool storage is. Where the extra food is stored. Every single night I had to make up the bunk, reworking sheets and blankets. For a “that bed must look gorgeous before I get into it every night” person like me, this was not what I had thought would be the case.

 

The “factory finished” Bristol Channel Cutters have this ingenious pull out pilot berth on the port side. By day it masquerades as the back to the settee, a book-less bookshelf, if you will. By night, it slides out to form a comfortable double bunk. Call it a Murphy bed for the vertically challenged.

This is the "closed" bunk on a friend's boat. Clearly in project mode himself!

Our boat, hull number 6, was built before the yard was even offering finished interiors. The original owners (we are owner #3) had it taken to San Diego from Costa Mesa to get her ready to sail; the man we bought her from had never really gotten around to doing the rest of it (other than removing the diesel stove). In 1992, we had basically a clean slate to work with, and putting a v-berth in was high on the priority list. That the head would be under the insert for the bunk was not a great worry; who needs to use the head in the middle of the night?

Calypso, as we bought her. Clean slate interior!

Ahem, that would be the almost 50 year old me, with her almost 50 year old bladder. No judging.

 

Between that and wanting any visitor to have more head privacy, plus the desire to have a place to shower down below, plus knowing that we’re cruising as a couple this time around (no kids), plus the realization that actually, Lyle Hess (the designer) knew what the heck he was doing when he figured out how the accommodations would work on this boat . . . we’re changing the interior to more closely mirror the factory finish, and we are so excited about it!

 

There are a couple of big things we won’t change. Our galley is to starboard, not port, without the oh-so-smart aspect of the sink bumped out more toward the centerline (for easier drainage!). Our floorboards are about 2 inches higher than on the yard-done boats, giving more room for larger water tanks but minimizing headroom for Jeremy.

 

The work on the bunk has begun in earnest as of this past weekend, when we had a chance to really sit and look and scheme and measure. Boat geometry is complicated in any case; it feels more complicated with a small boat.

demolition is the first step

We need to make the bunk as wide as it can be when it’s pulled out. Allow for as much head room on the outboard (under the side deck) side as possible. Make sure the backrest of the settee isn’t too low for comfort. Ensure that someone sitting on the settee to eat can do so without having to crunch his knees. And make sure there’s bulkhead room for lounging with your back to the bulkhead. All this while making sure the pullout section is supported. That’s a lot of different things to think about in one small space.

 

We’ll mock it up a few different ways before committing to anything, of course, but one thing that stood out as we were measuring and talking and trying things out. 

Blue tape? Where we could lower the backrest, to gain bunk width.

Inches matter.

 

Like literally, an inch will make a huge difference in comfort. It might mean between being able to sit up in bed or relax against the bulkhead – or not. It might mean the difference between a comfortable backrest while sitting or a contortionist’s nightmare while eating.

Can we find enough inches to make this tenable?

 

It’s incredible to be thinking in terms of inches. When so much of my life as a landlubber is consumed with more more more, when we talk about faster internet and acres of land and how much MORE can we have, there is something so satisfying in focusing on where to find one more inch of space.

 

It’s precision. Priorities. Looking and thinking outside of the box. Careful attention to detail. And a certainty that it can all work beautifully well together.

Very initial mockup.

 

Where can you find your inches?